Air King BFQ 90 High Performance Bath Fan, 90-CFM

Air King BFQ 90 High Performance Bath Fan, 90-CFM

Regular Price: $49.00 |

Got a Question for me? Powered by Aol.com   Product Details Plastic housing is quiet and will not rust, perfect for areas near salt water or with high moisture 1-Year parts only warranty High performance ventilation at a budget friendly price Right or left hand ducting Easily installs using the included snap-in mounting system Dear visitor! This website has been designed to help you find THE BEST PRICE. When you are ready to buy, your payment will be processed through one of the most TRUSTED SUPPLIERS directly. Thank you for shopping with us!

Customer Review

A welcome upgrade over the old noisemaker
Bought the 90 cfm/2.5 sones unit to replace the builder's grade 50 cfm/4+ sones. The additional airflow was noticeable and the noise wasn't - just what I needed.The frame is all plastic, which means no rust, though seeing how the bracket, motor, and motor mount is steel, I wouldn't place too much value on that aspect. The box is more rigid than the typical bent steel box, however, so there is value in that - no rattles.Installation was a snap - literally. These units have a separate bracket that you screw into the joist, then snap the unit into place from below. It's much easier than the usual small-flange-at-the-edge mounting that other units use. Indeed, I spent less time installing this unit versus removing the old (working in a cramped attic space, nails to pry out, etc.) A plastic grommet and 3 wire nuts are included too - a nice touch.The included materials note that ventilation fans have a 5 year warranty, not just a 1 year, so the...
Top to learn more

June 25, 2010 (SoCal) | Helpful Votes: 32 | Rating: 5

Product Description

Air King BFQ90 High Performance Exhaust FansThe High Performance Exhaust Fan Series Features an Unique Snap-In Installation System. The Included Bracket Nails or Screws to the Ceiling Joist Allowing the Fan Housing to "Snap-In". Connect the Wiring and the Ducting, Install the Easy Fitting Grill and You are Done. A Bath Fan Installation can Now be Done in Minutes. The Durable High Impact Plastic Housing Ensures Quiet Operation and Maximum Performance. High Performance, Attractive Stylized Grill and Quick Installation Make the High Performance Exhaust Fan Series Right for the Job. UL Listed for Installation over a Tub or Shower on a GFCI Circuit HVI2100 Certified Motors Suitable for Continuous Operation Easily Installs Using the Included Snap-In Mounting System and are Available in Contractor Packs (4 Housings and 4 mbgs) Wire Nuts and Romex Connector are Included CFM (Air Movement): 90 Sones (Sound): 2.5 Exhaust Capacity: 80 - 110 sq. ft. Duct Size: 4" Amps: 0.45 Top to learn more

Great fan, troubled installation
It took me less than 2 minutes to remove the old fan and over 2 hours to install this Air King. I am very happy with the quiet, functional fan but the design of the fan made for a difficult installation.The design of this fan could have easily been slightly different and allowed for a much easier installation. After cutting a minimum size hole, I was unable to maneuver it from above or below and get it into the snap bracket. I finally found that if I remove the connector from the body that hooks up to the hose it can be inserted from below, but you still have to go into the attic to re-attach the hose connector and hose.Had the connector been directed away from the bracket instead of to the side, it is possible it could have been installed completely from below.Now that it's installed, I do enjoy this Air King fan. The air exhaust is superior to what I had before and much quieter. It is an excellent fan.
Top to learn more

November 17, 2010 (Texas) | Helpful Votes: 9 | Rating: 4

AirKing bath fan
Yesterday I received the AirKing bath fan and decided to install it right after work. I had an old air king from 1967 which had to come out. That took me 2 hours and a mess to do. Then I realized that the original duct was only 3" in diameter while the recently purchaced AirKing was 4" in diameter. I picked up a 4" to 3" converter and snaped the whole thing together in 30 minutes! No more loud noise. I'm very happy with the New AirKing!
Top to learn more

September 17, 2010 | Helpful Votes: 9 | Rating: 4

Holmes 7 Twin Window Fan, HAWF2021-U

Regular Price: $29.99 | Price with discount: $22.55 | You Save: $7.44 (25%)

Got a Question for me? Powered by Aol.com   Product Details Window fan with twin 7-inch blades for effective cooling and air circulation Fits into windows that measure 24 to 36 inches wide Adjustable extender screen; bonus extender panel Two quiet speed settings, manually reversible Measures 22.7 by 11.7 by 5.3 inches; 1-year limited warranty Dear visitor! This website has been designed to help you find THE BEST PRICE. When you are ready to buy, your payment will be processed through one of the most TRUSTED SUPPLIERS directly. Thank you for shopping with us!

Customer Review

MY HOME EXHAUST FAN
I bought this thinking that it can be used as an exhaust fan for my kitchen. I don't like the smell of food inside the house so I gave this a try. It has two fan settings which in my opinion is a good option. Operational sound is quite loud but it works pretty well by circulating the air in the kitchen and removing that awful smelling fumes. Price is reasonable.
Top to learn more

December 27, 2008 (Boston, MA) | Helpful Votes: 28 | Rating: 5

Product Description

The Holmes Twin Window Fan is specifically designed and safe to use in a window. This product comes with two 6.5 inch blades, multiple speed settings, and a built in extender screen to help secure the fan into the window. This product can fit into virtually all double hung and slider windows and can also be used with a window screen in place. Top to learn more

Not bad for a $16.60 fan!
I bought this fan at Walmart. In fact, I bought two window fans because I didn't think this fan would be worthy. I got home that night around 11:45pm. It was 81 degrees in the house, but outside it was nice and cool. I set it up and it really pulled the cold air in. The temp dropped to 73 with the fan on. Nice.My windows are new casement type windows and this one fits perfectly. It has a extension that will make it longer and at the other end, there is a pull out extension that will make it even longer.I'm returing the other one which is a HAWF2026 - it just doesn't have the extra extension and the adjustable one (doesn't have any of them).I really wished they put a more powerful motor in these, but for the price it's not bad. If there is a more powerful one I'll buy it. I'll give it a 4 star because it's not powerful enough, but it works great!BTW, I do have AC in the house, but why use AC when the outside air is chilly...
Top to learn more

July 29, 2007 (CA USA) | Helpful Votes: 45 | Rating: 4

Panasonic FV-11VQ5 WhisperCeiling 110 CFM Ceiling Mounted Fan, White

Regular Price: $234.00 |

Got a Question for me? Powered by Aol.com   Product Details Can be run with no less than 110 CFM and no more than 0.3 sone Housing: Double hanger bar system allows for ideal positioning Motor/Blower: Power rating of 120 volts and 60 Hz Motor/Blower: Fan is UL listed for tub/shower enclosure when used with a GFCI branch circuit wiring Grille: Attached directly to housing with torsion springs Dear visitor! This website has been designed to help you find THE BEST PRICE. When you are ready to buy, your payment will be processed through one of the most TRUSTED SUPPLIERS directly. Thank you for shopping with us!

Customer Review

Panasonic Produces Another Quality Ventilation Fan
The Panasonic FV-11VQ5 is the newest release from Panasonic in the WhisperCeiling series of ventilation fans. Panasonic discontinued the .8 Sone, 110 CFM, FV-11VQ3 for this next-generation, enhanced version. It is essentially the same model with some minor variations, the most noticeable being a reduction in operational sound level from .8 Sone to .3 Sone. The power consumption between the two units has also been reduced from 30.7W to 21.1W (at .1 static pressure), which drops the Amperage from .26 to .18, making this unit more efficient.The FV-11VQ5 is relatively large, but a fantastic performer for the money. The rough-in cut required to mount the unit is 10-1/2" x 10-1/2". The outside grill is 13" x 13". A cardboard template is supplied to assist in drawing the physical layout of the rough-in cut on the ceiling. This greatly enhanced the ease of installation. Opening the unit, there's little that needs to be done other than remove the tape from the internal...
Top to learn more

October 4, 2010 (Rochester, NY USA) | Helpful Votes: 86 | Rating: 5

Excellent Quality
Once I opened the box, the superior quality of this vent over what I was used to from Broan/NuTone was readily apparent. The squirrel-cage fan is much more robust and has a much more solid feel when you spin it by hand. The smoothness of the motor is nothing like that of a Broan/NuTone vent.In 11 years that we have lived in our current house, I have replaced the NuTone vent in out master bath twice. I expect this Panasonic unit to last 20 years.I have been amazed at how the level of quality in Broan/NuTone units has dropped. My parents have two Broan ceiling mount fan forced heaters in their bathrooms. They were installed when the house was built 50 years ago. They still work perfectly and quietly. The new products from Broan/NuTone simply do not last.
Top to learn more

November 13, 2010 (New Jersey) | Helpful Votes: 21 | Rating: 5

Its big and quiet.
I bought this for $119.99 to replace my old bathroom fan that wasn't working. I am a novice on installing something like this or doing any construction work. I don't know how its possible for anyone to install this fan from below. I have an attic and I installed the fan from there. It was not easy for me to install it. First, I had to make a hole bigger. Being an amateur at cutting hole, I made the hole a little bit too big. The instructions show 3 ways you can install the fan. I choose the first way where you use the support bracket and install 2 screws from the bottom. The second way uses 1 and 1/2 support bracket, meaning there's a long piece in the back and half a piece in the front (where the exhaust and power box is located). It seems impossible to install using the second installation instruction unless you have a big space between the joist. The third way is for small space between the joist and you are able to screw the fan from the bottom on both sides of the fan...
Top to learn more

April 20, 2011 | Helpful Votes: 17 | Rating: 4

MaxxAir IF12P Utility 12-Inch 525 CFM Exhaust Fan

Regular Price: $59.98 | Price with discount: $57.99 | You Save: $1.99 (3%)

Got a Question for me? Powered by Aol.com   Product Details Fully automated louvers Just plug it in and turn it on Single speed operation High-impact ABS plastic construction 10-foot power cord with grounded plug This item is eligible for FREE SHIPPING Sale Price: $57.99You Save $1.99 (3%) Dear visitor! This website has been designed to help you find THE BEST PRICE. When you are ready to buy, your payment will be processed through one of the most TRUSTED SUPPLIERS directly. Thank you for shopping with us!

Customer Review

Product Description

This Ventamatic Utility Exhaust Fan delivers powerful exhaust performance in a small footprint, changing the air in a 10ft. x 10ft. area every two to four minutes. Installation is easy - just plug it in and turn it on. Fan Diameter (in.): 12, Air Delivery (CFM): 525, Volts: 120, Speeds (qty.): 1, Dimensions L x W x H (in.): 16 x 7 x 16, Needs to be Hardwired: No, Depth (in.): 7, Dimensions L x H (in.): 16 x 16, Amps: .4 Top to learn more

Operational details
We purchased one of these for use in a remote location. Its on/off switch is linked to the louvers, so we had to remove this linkage to allow the fan to be plugged into a switched receptacle, and have the louvers open and close automatically as air from the fan push them open. Works fine with the change.
Top to learn more

July 27, 2011 | Helpful Votes: 4 | Rating: 4

Works better than expected
Customer Video Review Length:: 0:15 MinsWhen I received this fan I was a little surprised I had not noticed it was made to project about 3 inch's outside the building, then after going back and looking at the picture it didn't actually show how it looked from behind. Anyway it works great; I built a box inside my shed so it would fit in the wall like I wanted it. Now the louvers are flush with the outside of the building and trimmed out with molding. It is very quiet and moves air out quick. I did the math and it actually moves air out faster than the code calls for in my 12'X16" shed I built. The long 10' cord works well for reaching over to the generator just in case we have a power outage the fan can pull exhaust fumes out.
Top to learn more

May 1, 2012 | Helpful Votes: 0 | Rating: 4

LEDwholesalers GYO2402 6-Inch 240 CFM Air Duct Inline Hydroponic Booster Fan

Regular Price: $39.99 |

Got a Question for me? Powered by Aol.com   Product Details All metal construction (including the blades); discreet packaging Fan exhaust booster blower air cool; 4-Feet power cord Hydroponic booster fan CFM 240 air duct inline, 6-inch male on one end, female on other end Capacity 120 volt, 60 hertz, 37 watts Dear visitor! This website has been designed to help you find THE BEST PRICE. When you are ready to buy, your payment will be processed through one of the most TRUSTED SUPPLIERS directly. Thank you for shopping with us!

Customer Review

Wicked Little Fan
This bad boy can push some air... No wiring diagram so cords are a little tricky to figure out and wire, but its just black/black, white/black and ground to the brass screw on the fan..Easy once ya know it. Sucks the air right out of my cooltube.....Seller was on point in shipping also...
Top to learn more

February 16, 2011 | Helpful Votes: 23 | Rating: 5

Great Fan for the Money!!!
Great fan for the price. Its actually pushes quite a bit of air and is very simple to wire up. It didnt come with directions but its not rocket science on how to wire up a fan. Comes with everything you need, other than a pair of pliers for the nut for the ground wire. Took me 5mins or less to wire it up and I was extremely pleased with the air output of the fan. Definitely going to look into purchasing another one of these!!
Top to learn more

March 23, 2011 | Helpful Votes: 15 | Rating: 5

Product Description

Boost air flow in long duct runs with this inline duct fan. Constructed of all metal, this fan is effective and efficient. All metal construction (including the blades) Light weight 240 CFM 4 feet power cord 120V, 60Hz Discreet packaging Installation Instructions: * Loosen a screw on the outside of the housing. * Secure GREEN wire to the housing with the screw. * Other two wires can be randomly paired up with wires from motor. * Line up the bare ends of each pair of wires; twist the bare ends CLOCKWISE with fingers; put wire nut on and again twist CLOCKWISE until tight. * Hold wire nut in one hand and tuck on each wire to confirm that they are secure. Top to learn more

Works great!
This fan is very well built. It has metal blades which are an improvement over some the plastic bladed ones. It does make a little noise, however it does move a lot of air. I guess you have to have a tradeoff somewhere. Overall it is a very nice product.
Top to learn more

April 3, 2011 | Helpful Votes: 18 | Rating: 4

Panasonic FV-30VQ3 WhisperCeiling 290 CFM Ceiling Mounted Fan

Regular Price: $326.00 |

Got a Question for me? Powered by Aol.com   Product Details Quiet enough that you might not even know it's on Fan housing is made of heavy-gauge zinc galvanized steel Rated 290 cubic feet per minute Continuous, trouble-free operation for many years due to high-quality components and permanently lubricated motors Totally enclosed condenser motor and double-tapered, dolphin shaped bladed blower wheel quietly moves air Dear visitor! This website has been designed to help you find THE BEST PRICE. When you are ready to buy, your payment will be processed through one of the most TRUSTED SUPPLIERS directly. Thank you for shopping with us!

Customer Review

Quiet fan is excellent
Panasonic FV30VQ3 Ceiling FanI installed two of these fans near the peak of a cathedral ceiling in a new "sunroom", to exhaust hot air on summer days. See Customer Images of the roughed-in installation. Each fan is on a timer, so one or both fans can be used. A third fan was installed in a new storage room also used for painting and chemical cleaning.The only issue - the fan frame's actual height is 9 3/8", while the 2x10's in that storage room ceiling are only 9 1/4", so some shimming was necessary. Other than that, they are pretty easy to install in NEW construction. To install in existing construction would be significantly more difficult, as you would have to get a switched 14/2 NM cable to the fan's junction box AND connect the fan's 6" steel output pipe to a 6" duct that exhausts the air to the outside.The best thing about these fans is they are not loud. No one makes a silent fan that moves 300 CFM, but the mild sound of whooshing air...
Top to learn more

January 29, 2009 (Gaithersburg, MD United States) | Helpful Votes: 13 | Rating: 5

perfect!
I purchased this fan for a basement finishing project, installed it in my music practice room for smoke extraction. It is very quiet considering the amount of CFM's its moving! It installed easily between floor joists and the fit and finish is great!Couldn't be happier with it at this point!
Top to learn more

December 11, 2010 | Helpful Votes: 3 | Rating: 5

Perfect Bathroom Fan
We were looking for a powerful yet quiet bathroom fan to efficiently move steam from when we take a shower. This fan does the trick at 290 cfm (about three times the average home depot fan). Highly recommended.
Top to learn more

December 9, 2011 | Helpful Votes: 2 | Rating: 5

Product Description

FV-30VQ3 WhisperCeiling™ 290 CFM Ceiling Mounted Fan So Quiet You Might Not Know it's OnThis WhisperCeiling™ model features a totally enclosed condenser motor and a large, double suction blower wheel to quietly move air. A small wheel turning very fast will create more noise than a large wheel turning more slowly for a given airflow. Our fan uses a wide blower wheel that moves a large amount of air at reduced RPMs. The blower wheel is also designed to draw air in from both sides, which helps keep the noise down, as there is more area for the air to enter the wheel. In fact, it is quiet enough that you might not even know it' Top to learn more