Samsung LCD / Plasma TV Capacitor Repair Kit, Replacement Parts

Samsung LCD / Plasma TV Capacitor Repair Kit, Replacement Parts

Regular Price: $9.99 | Price with discount: $12.99 |

Got a Question for me? Powered by Aol.com   Product Details 1-220uf 25v 6-1000uf 25v 6in Solder 6in Solder Wick and cleaning swabs 4-2200uf 10v Dear visitor! This website has been designed to help you find THE BEST PRICE. When you are ready to buy, your payment will be processed through one of the most TRUSTED SUPPLIERS directly. Thank you for shopping with us!

Customer Review

Works!
If you are handy with a soldering item, and are extremely frustrated with your Samsung LCD TV not working, I would recommend giving this product a try. However, before you do I strongly recommend searching for online information (YouTube, etc.) to see if your model/year has the described problem and that you can do the work yourself. Obviously, enough Samsung televisions have this problem that Hobby Mods came up with a repair kit. The capacitors are of high quality, and the kit is complete (except for the soldering iron). In my case, the OEM capacitors did not look bad, but I replaced them all anyway and reset all the ribbon cables in their respective connectors. My TV has been working since (so far 2 months). Hope this helps you!
Top to learn more

March 14, 2011 (Maryland) | Helpful Votes: 13 | Rating: 5

A Must for any Samsung with Pink Dot Problems / Startup Problems
These capacitors worked very well to fix my 46" Samsung with pink dot / start up problems. I youtubed the problem, watched a couple of videos, then opened up the back of the TV and sure enough all of the capacitors with problems jumped out at me. If you have a little bit of mechanical aptitude or soldering experience you'll have no problems with this fix and this is the kit for the job! My TV was fixed nine months ago and it's still going strong with no issues.
Top to learn more

November 22, 2011 | Helpful Votes: 4 | Rating: 5

Product Description

You've probably done some research to know that the leading cause of LCD and Plasma TV failure is the capacitors on the power or inverter board. This can be fixed very easy. There's not a lot of special skill or tools required to change capacitors in a TV. Replacing the capacitors can fix your TV which could last you several more years. If your TV has the following symptoms you should consider replacing the capacitors. ? No picture but sound and power LED is on ? Picture disappears after start-up ? Screen Flickering ? Slow start-up ? Relay clicking noise Top to learn more

Cheetah Mounts APTMM2B Flat Screen TV Wall Mount Bracket for 32-65-Inch Plasma LED LCD TV

Regular Price: $89.99 |

Got a Question for me? Powered by Aol.com   Product Details Tilt Range: 15 Degree Downward Supports up to 165LBS Flush 1.9" Profile Universal Design Fits Most 32-55 & 32 - 65 inch TVs 6" 3-Axis Magnetic Bubble Level Included Dear visitor! This website has been designed to help you find THE BEST PRICE. When you are ready to buy, your payment will be processed through one of the most TRUSTED SUPPLIERS directly. Thank you for shopping with us!

Customer Review

Quality mount -- not cheap but low-cost (by design). Like it.
I was skeptical of this mount. Why should this be so cheap compared to other mounting kits? I ordered one (due to the price), and prepared to return it if I did not think the mount could handle the weight of the 52" LCD TV (Samsung).Once I got it, I understood the cost. Good low-cost design and built with solid heavy duty steel.- Two horizontal bars are load-bearing, and for proper VESA spacing, they have to be parallel and relative distance must be in the right tolerances. These are made of solid steel.- Two vertical bars (in the wall mount) are flimsey, and that's ok. it should be solid enough make a rectangle box w/ square angles. That's it.- Two vertical mounting (to the TV) brackets are of heavy duty metal. Making this in to two parts (not one), reduction of material, but also allows free horizontal adjustment on the TV mount.- By doing the above, the kit is small, uses less metal (and reduce shipping and material waste)...
Top to learn more

June 3, 2009 (San Jose, CA, USA) | Helpful Votes: 650 | Rating: 5

Great TV Mount
The Cheetah mount is an incredible value. The mount is amazingly sturdy and very well built. It took me about 30 minutes to assemble the parts out of the box. Then another hour to mount the TV to the brick above our fireplace. I used 4 Quicktap blue masonry anchors to attach the mount to the wall, and it is so secure I could probably hang from the TV itself.I was also pleased to find that the mount included all of the hardware (bolts, washers, spacers) that you would need to mount almost any VESA compatible flat panel. Our TV is a 52 inch Samsung (750 series) and the bolts I needed were included.Overall, a great buy.
Top to learn more

December 21, 2008 (Metro Detroit) | Helpful Votes: 104 | Rating: 5

Product Description

The APTMM2 flat tilt mount features a slim 1.4-Inch profile from the wall to the back of your display. Additionally it has 0-15 degrees of tilt. The APTMM2 mount is constructed with 8LBS of 100% High Grade Steel providing a sturdy and reliable mount. The APTMM2's solid wall plate allows for quick and easy installation and will support a wide variety of stud applications up to 28-Inch apart. The APTMM2 mount will fit the majority of LCD and Plasma Displays up to 65-Inch. Most LCD and Plasma displays 65-Inch and smaller conforms to the VESA Standards and this mount will support most odd sized hole patterns that do not conform to the VESA Standards. For more information on what exact hole patterns this mount will fit please see the Hole Pattern Coverage in specifications section. Top to learn more

Can't beat it for the price! Cheetah APTMM2B
Just installed my 42" Plasma in our bedroom, and here's my take:This is actually a high-quality, very sturdy mount. When I took it out of the box, I was pleasantly surprised.Now, here is the REST of the story...The directions that come with this kit are mediocre at best. The pictures are vague, and only after wrangling with this pile of metal did I figure out how this thing is supposed to be assembled. First of all, the included drywall anchors are NOT drywall anchors at all -- they are masonry mollies, and won't work with standard residential drywall. Thanks for telling me before I put 4 gigantic holes in my wall, Cheetah!So if you're using this in your home, here's what you need to do: 1. Assemble the rack on the floor/table/bed/whatever, and make sure it is square. 2. Find the wall studs, and mark them lightly with a pencil. 3. Hold the mount up on the wall where you want it, and the make sure the holes (not the "obvious" 4 holes)...
Top to learn more

March 18, 2011 (Washington DC) | Helpful Votes: 41 | Rating: 4

Cheetah Mounts ALAMLB LCD TV Wall Mount Bracket with Full Motion Swing Out Tilt and Swivel Articulating Arm for 23-37" Flat Screen Displays with VESA 100 or 200 Mount Patterns

Regular Price: $89.96 |

Got a Question for me? Powered by Aol.com   Product Details Single Stud Installation, Powder Coat Paint Installation Manual, All Hardware and 6" Magnetic Bubble Level Included Fits VESA 100 and 200, Up To 65Lbs ±15° Tilt, 4° Rotation Adjustment 20" Extension, 180° Swivel Dear visitor! This website has been designed to help you find THE BEST PRICE. When you are ready to buy, your payment will be processed through one of the most TRUSTED SUPPLIERS directly. Thank you for shopping with us!

Customer Review

Good, Less Expensive Mount
We have installed (2) of these mounts. (1) on a 26" LCD and (1) on a 32" LCD. Both installations were easy, with the product meeting expectations. The second mount we installed was missing a couple of minor parts so I sent a quick e-mail to Cheetah mounts. An hour later, I had the 2nd day air tracking number for the remaining parts. While it was frustrating to be missing the parts, I was amazed by the quick response.
Top to learn more

January 18, 2010 (Cochranton, PA USA) | Helpful Votes: 126 | Rating: 5

Excellent Mount
We just mounted a 26" LCD and this mount worked perfectly. Well constructed and super easy to install. Before purchasing I called the company to verify the TV would work with this mount, I was only on hold for a few seconds before speaking with a rep who was more than helpful. I highly recommend, especially at this sale price.
Top to learn more

January 4, 2010 (Denver, CO) | Helpful Votes: 51 | Rating: 5

Product Description

This mount fits the majority of displays in the 23-32" size range and some models up to 42". Specifically, it fits VESA 50 - 200 hole patterns and TVs weighing up to 65lbs. If you are unfamiliar with VESA patterns, these are square or rectangular patterns between 2 and 8 inches per side. This mount provides 20" of extension, 180 degrees of rotation, +/- 15 degrees of tilt, 4 degrees of rotation adjustment, and collapses to 2.7" from the wall. The load bearing portions of the mount are constructed from High Grade Steel providing a sturdy and reliable mount and separate cover pieces for the wall plate and pivot joints providing a clean finished look. The package includes the mount, manual, all necessary installation hardware, and a 6" three-axis magnetic bubble level. This mount also includes a 10' High Speed HDMI with Ethernet cable. The HDMI cable allows the use of home entertainment networking, audio return, 3D playback and delivers the sharpest, richest viewing and listening experience possible. Top to learn more

Good Mount
I like this mount. It is strong and holds a 30" TV no problem. The extension is very nice and the tilt helps with the glare from the dome light in the ceiling. It can turn all the way to the side and lets the TV face the kitchen counter. Our TV used the inside holes which are VESA 100 but it has wider holes as well so we could use it for a larger TV in the future. A torpedo shaped level comes with it which is now a nice addition to the tool drawer. Basically really liked it. The only issue is the TV being level. The TV tilts just slightly to the right. Enough to bother me. Only annoyance on an otherwise good product.Update: I called Cheetah about the TV not being level. It turns out the screw behind the TV which controls the tilt Also allows the TV to twist a little. Now our TV is level!
Top to learn more

May 22, 2010 | Helpful Votes: 130 | Rating: 3

VideoSecu Articulating LCD LED TV Wall Mount Full Motion Tilt Swivel Mount Bracket for 22" to 37" Flat Screen with VESA 100 200 Mount Pattern 1XE

Regular Price: $145.99 |

Got a Question for me? Powered by Aol.com   Product Details Load capacity up to 55 lbs; Post-installation level adjustment allows the TV to perfectly level The arm can extend out up to 20". Swivel +/-170 degrees and tilt +/-15 degrees Fits most TVs 22" - 37" LCD LED TV monitor ( check VESA and weight ) Cable management design; Standard hardware pack included Fits VESA 75x75/100x100/200x100/200x200 compliant; Mount plate is 8.5"x8.5" Dear visitor! This website has been designed to help you find THE BEST PRICE. When you are ready to buy, your payment will be processed through one of the most TRUSTED SUPPLIERS directly. Thank you for shopping with us!

Customer Review

Excellent low cost movable arm
This flat panel mount is adjustable and very cost effective, an excellent product for the money. This arm comes with all needed mounting hardware for either masonry or wall stud mounting as well as a set of 4 screws for several sizes of panel mounting screws. It also comes with a small wrench for two different sizes of hex heads on the arm and an allen wrench for one of the arm adjustments. It is at least a two man operation to attach the flat screen after the arm is attached to the wall. I mounted mine on a stud in the wall. For stud mounting you use two of the six mounting hex head lag screws that come with it. It doesn't say exactly in the directions but you should use a 1/4" drill bit to pre-drill the holes in the stud. I would not recommend trying to use the included hex wrench to tighten down the wall mounting lag screws, you need more leverage to tighten it than it provides; use a crescent wrench or other longer hex wrench. I used a stud finder to locate the studs...
Top to learn more

October 4, 2010 (TX USA) | Helpful Votes: 76 | Rating: 5

Great Mount
I was hesitant because of the price but after looking at the reviews I decided to go ahead and purchase one. This is the first time I mounted a TV on the wall so I didn't know exactly what to expect. I put a 32" Toshiba LCD on it. Mount is strudy and has good adjustments. Installed it in about 20 minutes. Works great and I would definately recommend this for a low cost alternative for mounting a tv.
Top to learn more

October 9, 2010 (Fair Oaks Ranch TX) | Helpful Votes: 48 | Rating: 5

Product Description

The VideoSecu articulating mount support most mid size flat panels up to 55 lbs (25 kg) with VESA 75x75/100x100/200x100/200x200mm. This is one of the popular medium size TV mount, with heavy duty steel construction. The two-link arm design provides up to 170 degrees of swivel, 15 degrees tilt up or down, and 3"-20" extension, make it easier for get perfect viewing angle. It also offers 5 degrees roll adjustment for level the mount in different positions. The on arm cable management ring system design, guides wires and prevent cable pinching. Shipped with standard hardware pack. Top to learn more

Looks good, does the job
I am using this mount for a 27" LCD in my bedroom. Using a swivel mount with tilt works great for almost any room layout. The black powder-coat paint matches the TV, and looks great. Adjustment and locking is easy with the included hex wrench. I would rate this "5 stars" if the mounting screws were better. Made from relatively soft steel, the screw head strips very easily. After ruining one screw, I replaced it with a large black deck screw. It might be advisable to drill small pilot holes before attempting to drive the screws.Word of caution: If you do not drive the proper mounting screws into the center of a wall stud, if you exceed the specified TV weight limit, or if you try to get by with a really cheap swing arm mount, you may be signing a death sentence for your $500 TV (and perhaps yourself)!
Top to learn more

December 8, 2008 (TX USA) | Helpful Votes: 39 | Rating: 4

VideoSecu Tilt TV Wall Mount for Most 32"-65" LCD LED Plasma TV Flat Screen, Sturdy Steel Wall Plate Free HDMI Cable and 6" Bubble Level M43

Regular Price: $159.99 | Price with discount: $18.95 | You Save: $141.04 (88%)

Got a Question for me? Powered by Aol.com   Product Details VideoSecu TV wall mount. Report to Amazon if received counterfeit mount not in VideoSecu box Fits most 32" to 65" flat panel screens; VESA compatible up to VESA710x475 Content: TV wall mount, HDMI cable, 6" 3-Axis Magnetic Bubble Level, standard hardware pack Supports screens up to 165 lbs; Solid sturdy wall plate provides strength and durability Rail design allows TV to shift left and right for TV placement adjustment; Adjustable 15 degree of forward tilt Dear visitor! This website has been designed to help you find THE BEST PRICE. When you are ready to buy, your payment will be processed through one of the most TRUSTED SUPPLIERS directly. Thank you for shopping with us!

Customer Review

PURCHASE THIS MOUNT!
I originally purchased a mount from Best Buy for almost $200 and when I got it home I decided to check Amazon for a better deal.This was the outcome of a very short search. I ordered this mount and it showed up at my house in two days. This item is very well made and nicely finished in flat black powdercoat. I hung a 52" lcd on it in about 1/2 hour time.DO NOT spend $200 on a wall mount!By the way....the Best Buy mount went back the next day.
Top to learn more

October 22, 2007 (Oakland, MI USA) | Helpful Votes: 169 | Rating: 5

Excellent Mount - except for the wall screws.
I was a little concerned about purchasing this mount because it was so much less expensive than many of the others. I don't have extensive experience with HD TV wall mounts but this one does the job well and I am NOT disappointed. My only complaint is that the screws that it comes with for attaching it to the wall are crap. Two of them broke when I was screwing them into wooden studs - not plaster or concert but simple 2x4 wall studs! As a result my confidence level in the screws diminished and I went to the hardware store to buy new more robust ones. I still gave it 5 stars because other than that it as excellent value and I do not see any reason to buy a more expensive flat panel wall mount.
Top to learn more

December 30, 2007 | Helpful Votes: 113 | Rating: 5

Product Description

The VideoSecu MP501B is compatible with LED, LCD, and Plasma TVs and other flat panel display between 32 and 60 inches weigh less than 165lbs. Supports all VESA mounting standards up to 710x450mm and many odd size mounting patterns (mounting holes on the rear of the TV or panel should be no more than 28" apart horizontally and up to 17.7" vertically). Over 12 lbs solid heavy-gauge steel construction offers a smooth surface, high-tech look while providing strength and durability. Viewing angle can be adjusted by tilt 0-15 degree forward. TV is positioned just 2.2" profile from the wall for a clean, low-profile appearance. Lift and lock safety system secure the display in position as needed. How to ensure the mount compliance with your selected display? First, the weight of your display should be less than 165lbs. Second, mounting holes distance on the rear of TV must be less than 28" (710mm) horizontally and 17.7" (450mm) vertically. Last, the mount plate width is 30". Your TV should be at least 30 inch wide. Otherwise, you will see the bracket. Note: VideoSecu brand mount, please report to Amazon.com if you receive a mount without VideoSecu logo. Top to learn more

Solid mount and a good bargain.
Mounted my Samsung 50" plasma using this mount. My display is about 70 pounds.Installation was fairly simple. The back plate is 30 inches wide, so you will only be able to get 2 studs max. Important points:1. It is very important to make sure the lag bolts drill into the studs.2. The included hardware is iffy, so go spend the $5 at your local hardware store and get some better bolts.3. The level on the back plate is not 100% accurate, so make sure to use your own.The important thing to to measure where you want your holes and then measure them again and then make sure everything is level.The construction of the mount and rails felt very sturdy.For those that have never mounted a tv before there are 2 parts. A back plate that bolts on to your wall and then 2 rails that bolt onto the back of your display. You then place your display on the backplate. The rails have hooks to secure it onto the plate and then...
Top to learn more

December 20, 2009 (Houston, Tx.) | Helpful Votes: 238 | Rating: 4

VideoSecu LCD LED TV Wall Mount Full Motion with Swivel Articulating Arm for 23-37, up to 42 in TV Flat Panel Screen With VESA 200 100, 20 in extension and Post-installation Leveling System A35

Regular Price: $99.99 | Price with discount: $22.90 | You Save: $77.09 (77%)

Got a Question for me? Powered by Aol.com   Product Details Retracts to 3" to save space; Extends 20" from the wall Tilt, swivel and rotate for maximum viewing flexibility; VESA plate can be taken off for easy installation Post-installation level adjustment allows the TV to perfectly level Standard mounting hardware, Magnetic Bubble Level and free HDMI cable included Supports screens up to 66 lbs. Compatible with VESA 100mm/200mm/200 x 100mm (4"x4"/8"x8"/8"x4") Dear visitor! This website has been designed to help you find THE BEST PRICE. When you are ready to buy, your payment will be processed through one of the most TRUSTED SUPPLIERS directly. Thank you for shopping with us!

Customer Review

Absolute Perfection!
*UPDATE 11-10-11* Apparently the design and sale of this mount has changed since my original review. It's now easier to install, and comes with an HDMI cable and level. Otherwise, most of my review still stands.I was planning to make my own TV mount because all the affordable ones were so cheaply made. That was until I stumbled on this one for $25.Wow, was I surprised when it arrived! Very nicely double-boxed and packaged extremely well. Then the construction is quality all the way, right down to the chrome-plated nuts, screws and bushings. This mount was manufactured and boxed as if it were a high-dollar item.It only took about 15 minutes to have my 37" LG firmly hanging on the wall. Oh, and I did it all by myself.I can't comment on the mount-to-TV screws because my LG already provided them. And I did use my own 5/16" flat washers on 2 of the lag screws since none were included, but that's just my preference.I highly...
Top to learn more

August 27, 2010 (NE Ohio) | Helpful Votes: 272 | Rating: 5

Perfect wall mount for my 32 inch flatsreen
This wall mount is great. It is constructed very well and was easy to install. It looks clean and discreet on the wall and provides virtually 180 degree swivel for my 32 inch TV. It came with all needed hardware to mount to the wall including heavy duty wall anchors for the wall screws that did not hit a wall stud. The only complication was that I had to get the correct bolts for mounting the TV to the mount itself (the product did come with two different size bolts for this purpose but neither was the right size to mount the TV to the bracket). I found the correct bolts very easily at my local hardware store.After hanging the TV (32 inch BestBuy Insignia - Approx 30 lb. with mounting holes 200 X 200) I am very confident my TV is secure and safe. In addition, the product is very well priced. Local stores wanted $100-$150 for similar mounts. WOW!
Top to learn more

August 7, 2009 (Newtown, CT) | Helpful Votes: 118 | Rating: 5

Amazing Mount, Great Value, Get different Hardware
This mount is perfect for my 37" Vizio (VO370M).- Very sturdy and easy to adjust- Fit my TV perfectly without need to rebore holes in the bracked- Took about 45 minutes from opening the box to surfing the channels- Why would anyone pay hundreds for another mount?Keys to Installing:> Get new hardware - the bolts are too short to get a good grib of a wall stud through drywall and longer bolts make for a more secure connection to the TV> Get help - very easy to install with 2 people, might be tough attaching the TV to the mount on the wall by yourself> Don't over tighten - make sure all bolts and connections are secure, but leave a slight amount of play for final adjustments and leveling. Also, the hinges work best when tightened about 85%, this means the mount folds and extends easily but doesn't sway or rock too much.> Manage cables - I used zip-ties to secure the cables to the arm for a clean look. Make sure to leave...
Top to learn more

August 17, 2010 | Helpful Votes: 33 | Rating: 5

Product Description

The VideoSecu articulating mount ML530B is a mounting solution for most 22"-37" midsize flat panels and some models up to 42inch with VESA 100x100/200x200/200x100mm mounting hole patterns. Its 9 lbs heavy gauge steel construction provides safety loading up to 66lbs display. The high-tech look mount offers 15 degrees up and down tilt, 180 degrees of swivel, 360 degrees rotation and extension up to 20 inch for viewing angle and TV placement adjustment. The removable VESA plate can be taken off for easy installation. Common wall and TV attachment hardware, 6" 3-Axis Magnetic Bubble Level and free HDMI cable shipped with this articulating mount. Promotion: The articulating mount was updated to new design from Aug 4th, 2011. Please report to amazon.com if you receive a mount without VideoSecu logo. Top to learn more